🔍Check post-2020 forest loss and alerts for your area
Build a dashboard that shows natural forest in 2020, natural forest loss since 2020, and recent disturbance alerts, with numbers you can download.
What you will be able to do
Answer three questions that sit at the heart of deforestation-free supply chain checks, such as those under the EU Deforestation Regulation (EUDR), for any single area:
How much natural forest was there at the end of 2020?
How much of that natural forest has been lost since 2020?
Are there recent disturbance alerts in the area?
Most steps use curated templates, so the figures come straight from the datasets. One step uses the AI assistant, and this guide shows you how to check its work.
What you need
An area. Pick an administrative area, protected area, indigenous land or key biodiversity area from the Horizon list, or upload your own boundary (see How to add your own area to GNW Horizon).
About 15 minutes.
How steps are labelled
Curated Added in one click from a WRI-curated template. These outputs are verified and not generated by AI. Look for the CURATED label on each chart and hover over it for details.
AI-assisted Built by the assistant when you ask for it. Use Show working to see exactly how the figure was calculated.
Steps
Part 1: Create a dashboard for your area
Open GNW Horizon and select Dashboards in the top bar.
Under Create new dashboard, search for your area by name, or select Upload area to add your own boundary.
Select New dashboard next to your area.

Search for your area under Create new dashboard, or select Upload area, then select New dashboard.
Part 2: Natural forest in 2020
Curated Under More suggested modules, select Natural lands breakdown (SBTN map).
On the Natural Lands Area by Class chart, select Table. Add up the forest rows (Natural forests, Natural peat forests and Wetland natural forests) to get natural forest at the end of 2020. Use Next to see every row.
Part 3: Natural forest loss since 2020
Curated Under Add an analysis template, select Post-2020 forest loss. This adds a section with a summary, a chart of yearly loss from 2021 to 2025, a map of Tree Cover Loss since 2020, within 2020 natural forest, and a recent Sentinel-2 image.
On the Annual Tree Cover Loss in Natural Forest and Other Tree Cover chart, select Table. The sum of the Natural Forest column is natural forest loss since 2020. The Other Tree Cover column is loss outside natural forest, such as plantations.

The Post-2020 forest loss template in Table view. The CURATED label shows the figures come directly from the data. Add up the Natural Forest column for loss since 2020.
Part 4: Recent disturbance alerts
Curated Under Add an analysis template, select Near real-time monitoring. This adds daily integrated disturbance alerts for the last 14 days, by confidence level, with a map. Low confidence alerts are included and shown in a lighter colour; for reliable signals, focus on high and highest confidence.
AI-assisted To see high and highest confidence alerts since the last annual tree cover loss update (1 January 2026), type the prompt below into the assistant panel and send it. The assistant adds a new chart to your dashboard, marked AI-ASSISTED.
Try this prompt: "Add a chart of integrated disturbance alerts for this area from 2026-01-01 to today, high and highest confidence only, with the total area in hectares."
Change the start date to suit your reporting period.
Check the result. On the new chart, select Table to see the monthly figures, then select Show working. The generation record shows the code the assistant ran, the confidence levels it kept, the date range, and the totals. Confirm the filter reads high and highest, and the dates start where you asked.

The chart the assistant adds is marked AI-ASSISTED. Select Table to see the monthly figures.

Show working opens the generation record. Check the date range and the high and highest confidence totals.
Part 5: See where loss happened in the past (optional)
Curated Under More suggested modules, select Tree cover loss by driver. This shows how much tree cover loss from 2001 to 2025 is linked to each dominant driver, such as permanent agriculture or logging. Use it as background context.
NOTE: it describes long-term patterns in the area, not the cause of any specific loss since 2020.
Part 6: View overlap with protected areas and indigenous lands
Overlap figures in hectares are not yet available in dashboards, but you can see where your area overlaps these boundaries on the map.
Select Map in the top bar, then select Areas in the assistant panel.
Show your area on the map. For an uploaded area, open My areas and switch on Show on map next to it. For any other area, type its name in Search places.
Open Boundaries and switch on Protected Areas (World Database on Protected Areas) or Indigenous Lands (LandMark). One boundary layer shows at a time.
Zoom in until the boundary outlines appear, and check where they cross your area. Switching the basemap to Satellite (the map icon above the zoom buttons) makes the outlines easier to see. Repeat with the other boundary layer.

Protected Areas switched on under Boundaries, with the Satellite basemap. Boundary outlines show as thin white lines where they cross your area.
Part 7: Download and share
On each chart, select Download and then Data (CSV). Note the date you downloaded it, since alerts are updated regularly.
To keep working outside Horizon, select Continue in on any chart and choose Claude, ChatGPT or Gemini.
Part 8: Check it on the ground
Compare the loss and alert maps with the Sentinel-2 image on your dashboard. Zoom in on patches of loss to see what is happening on the ground. Loss in the data is a signal to investigate, not proof of deforestation.
Your results at a glance
Question
Where to find it
Type
Natural forest at the end of 2020
Natural lands breakdown, Table: forest rows added together
Curated
Natural forest loss, 2021 to 2025
Post-2020 forest loss, Table: Natural Forest column added together
Curated
Tree cover loss outside natural forest, 2021 to 2025
Post-2020 forest loss, Table: Other Tree Cover column added together
Curated
Alerts in the last 14 days
Near real-time monitoring, Table
Curated
High and highest confidence alerts since the start of the year
AI-assisted alerts chart, Table and Show working
AI-assisted
Long-term drivers of loss in the area
Tree cover loss by driver, Table
Curated
Overlap with protected areas and indigenous lands
Map, Areas, Boundaries (visual only)
Manual Map view
What it looks like on the ground
Sentinel-2 image on the dashboard
Curated
Tips for a better result
Read the Table, not just the chart. Every chart has a Table view with the exact figures behind it.
Keep your dashboard current. When new alerts arrive, a banner at the top of the dashboard says how many hectares are new. Ask the assistant to update the chart.
Know what the numbers mean. Tree cover loss and alerts show where tree cover changed. They do not by themselves confirm deforestation. Use the satellite image and local knowledge before drawing conclusions.
Know the forest definition. Natural forest comes from the SBTN Natural Lands Map 2020, which separates natural forest from plantations and tree crops. No canopy density threshold is applied, so totals can be higher than figures that use a 30% tree cover threshold.
Seeing alerts on the map. You can ask the assistant to show alerts for a specific timeframe on the map. The map legend does not show which dates or confidence levels are applied, so use the alerts chart and Show working (steps 9 and 10) for figures you need to report.
Commodity concessions. Under Map, Areas, Boundaries, you can also show logging, mining, oil palm, RSPO certified oil palm and wood fiber concessions alongside your area.
What this guide does not cover
JRC Global Forest Cover 2020, the second forest baseline used in GFW Pro.
Hectares of overlap with protected areas or indigenous and community lands. Part 6 shows how to view overlap on the map in the meantime.
Choosing a date range or confidence level for alerts without the AI assistant.
Exporting a whole dashboard to PDF. This is coming soon.
What to do next
Try the Create a dashboard quickstart to add more charts and text to this dashboard.
Try Add satellite imagery to a dashboard to look more closely at specific patches of loss.
If your upload fails, see How to prepare your data for upload.
Last updated